Monday, April 27, 2009

How to Reset Catridge HP 27,28,21 and 22

For 21 and 22 Catridge
Step for both catridge is same

1.Open printer cover,unplug the catridge which want to be resetted

2.Using tape, cover the top pin, at the second rows from the left (No1)









3.Plug in catridge to the printer,close the printer cover . Ignore if there are “Catridge(s) incorrectly installed”
Wait until printer movement stop!!

4.Unplug recenly catridge again, now cover using tape the top second rows pin from the right (no2)







Keep the first pin covered!!!

5.Plug catridge. Wait until stop moving

6.Unplug recent catridge , clean the tape from both pins

7.Plug catridge, its already resetted

For 27 and 28 Catridge
For 27 catridge , the steps is same with above

for 28 catridge At 4th step, pin which covered is diferrent, top pin, first from right .

Read More..

Monday, April 6, 2009

Canon IP1700 resetter









Free iP1700 - iP1300 Ink waste resetter below,

Canon iP1700 - iP1300 Service tools

Or use i iP tool. Download iP tool, Switch printer on "service mode", run the software, click Reset Main di Waste Ink Counter.

Service mode step;

  • Open the printer cover
  • Push and Hold Power button
  • Plug in Power cable
  • Close printer Cover
  • Release Power button
  • Push Power Button
Read More..

C110, CX7300, CX8300 & CX9300F Adjustment Program

C110, CX7300, CX8300 & CX9300F Adjustment Program
We were able to test the C110 reseter with an actual printer and it's working. All others were not tested with an actual printer but the good news is, the program itself is working even without the printer unlike other copies that are circulating in the net in which we are stuck in particular mode.


Epson C110 Adjustment
http://www.mediafire.com/?dnibclputnl

Epson CX7300 Adjustment
http://www.mediafire.com/?yymdtscjddb

Epson CX8300 Adjustment
http://www.mediafire.com/?117wmmymymm

Epson CX9300F Adjustment
http://www.mediafire.com/?houczbgjoao
Read More..

HP 4240/4250/4350/4500/4550






HP 4240/4250/4350 Printers:

  1. Turn the printer power off and then on
  2. When 000MB (beginning of the memory count) appears on the control panel display, press and hold down SELECT (checkmark button). Continue holding down SELECT until all 3 printer control panel lights flash once and then stay on (This may take up to 10 seconds)
  3. Release SELECT and press the UP arrow to scroll to NEW MAINTENANCE KIT
  4. Press SELECT to reset the maintenance kit counter

HP 4500/4550 Printers:

  1. Turn the printer off
  2. Hold down the CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED's come on
  3. Press the right side of the MENU key, then press the SELECT key
  4. You will enter SERVICE MODE after the normal test completes
  5. Press the ITEM key until the FUSER MAINTENANCE COUNT appears
  6. Press VALUE +/- to change to zero
  7. Press SELECT to save
  8. Press GO; the printer should return to READY
Read More..

Resetter for HP 4100MPF/4101MPF/4200/4300













HP 4100MPF/4101MPF Printers:

  1. While holding down the START button, turn the printer on
  2. The 3 LEDs will blink, and then stay lit (Release START button at this time)
  3. Press the UP arrow key. Display will read MAINT COMPLETE
  4. Press the CHECK button once, and the maintenance counter is reset
  5. Return to ONLINE

HP 4200/4300 Printers:

  1. Turn the printer power off
  2. Hold down SELECT and turn the printer power on. Continue holding down SELECT for several seconds, until all 3 printer control panel lights flash once, and then remain on (This may take up to 10 seconds)
  3. Use the UP arrow key to scroll to NEW MAINTENANCE KIT
  4. Press SELECT to reset the maintenance kit counter
Read More..

HP 5Si/4000/4050/4100/5000

HP 5Si:

  1. Press MENU key 4 times for CONFIG MENU
  2. Press ITEM to display SERVICE MESSAGE=OFF
  3. Press ENTER
  4. Press ONLINE

HP 4000/4050/4100/5000 Printers:

  1. Turn the printer off
  2. Hold down the left side of the ITEM and VALUE +/- keys, turn the printer on and wait until RESET MAINTENANCE COUNT is displayed and then release the keys
Read More..

HP IIISi/4Si Printers











To clear the Maintenance Service Message from the LCD display:

HP IIISi Printers:

  1. Press ONLINE until the light goes off
  2. Hold down MENU until PCL CONFIG MENU appears
  3. Press the MENU key until SERVICE MSG=ON* appears
  4. Press the + or - key to change display to SERVICE MSG=OFF
  5. Press ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE

HP 4Si Printers:

  1. Press ONLINE until the light goes off
  2. Press MENU until CONFIG MENU appears
  3. Press the ITEM key until SERVICE MSG=ON* appears
  4. Press the + or - key to change display to SERVICE MSG=OFF
  5. Press the ENTER key to turn message off, the * should appear, then press ONLINE
Read More..

RESETER for CANON PIXMA iP3000, iP4000, iP5000










1. Switch printer.
2. Push and hold Resume/Cancel button, then push POWER button - Light indicator will be green.
3. Release Resume/Cancel button, still hold POWER button.
4. Push Resume/Cancel button twice, then release POWER button
5. Light indicator is green
6. Push Resume/Cancel button 4 times
7. Switch off printer through push POWER button.
8.Finally Switch on

Permanent Resetter in being developed , after reset don't unplug the Power cable,Switch off is Ok but don't unplag, it will be unplag again...

For more information visit here http://www.startcopy.ru/repair/files/files.htm

Read More..

Resetter for EPSON RX420/425/430/R240/245/250









Adjustment Program for EPSON RX420/425/430
http://www.eaglehc.com/help/RX430.rar

Adjustment Program for EPSON R240/245/250
http://www.eaglehc.com/help/R250.rar

http://rapidshare.de/files/19836194/c67.rar.html
pass : www.apistech.net

Read More..

Canon MP160 Resetter









1. Download MP Tool

2. Press and HOLD your printer power button

3. Unplug your printer power cable

4. Plug your printer power cable and press the Printer Stop/Reset button, then release the printer power button

5. The Alarm light will be on and your computer will detect a new hardware

6. Run the MP Tool software and you can start to reset the waste tank
Read More..

Canon Pixma iP 1880









Reset ip1880:

  1. Push Resume button and hold for 1 until 2 minutes
  2. Open the Cover
  3. Pull of catridges and then plug in again
  4. Close the cover
  5. Switch off printer
  6. Switch on

You can download iP tool here. Download iP tool. Switch printer on "service mode", run the software, click Reset Main di Waste Ink Counter.

Good luck, Happy try..!!!

Read More..

Canon Pixma IP1000 Waste Ink Full












My pixma IP1000 has messages "Waste Ink Full"

I try to reset with manual service mode :

- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button

After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"
Read More..

Epson CX5500 & CX5505









Here you can get your Reseter for thi printer

Epson CX5500 and CX5505 Adjustment :
http://www.mediafire.com/?apmmjzdzjm0

Your comment is gladly been waited!!
Read More..

CX6900F adjustment program









Here is the link for the newest reseter brought to us by indoreset yahoo group.

Epson CX6900f adjustment
http://www.mediafire.com/?1xjyjmxnjdt


Good luck for try..!!!
Read More..

Epson Photo 1390 Adjustment Program









Here is the link for the properly labeled Epson Photo 1390. Just a correction to the file labeled CX1390.

Epson Photo 1390 Adjustment Program
http://www.mediafire.com/?gdtjykjm200

Gladly your comment bellow...
Read More..

Epson C92 and Photo R220/R230 Adjustment Program











Here is the link for the adjustment program for Epson C92 and Epson Photo R220/R230 with indoreset.bat.

Epson C92 Adjustment Program
http://www.mediafire.com/download.php?wuu2pn1tnkw

Epson Photo R220/R230 Adjustment Program with indoreset.bat
http://www.mediafire.com/download.php?9jbogzhk99v


Good luck to those who need these reseters!

http://indoreset.blogspot.com
Read More..