Sunday, January 1, 2012

Epson Stylus Pro 4000 Waste Ink Counter Reset

Epson Stylus Pro 4000 Waste Ink Counter Reset
Epson Stylus Pro 4000 Waste Ink Counter Reset

* While Powering up the printer, hold down the the left arrow, down arrow,
and Up arrow buttons
* You will get a “Self Testing” message.
* Use the Up Arrow button to select the “Clear Counters” menu.
* Press the right arrow button (the Menu button).
* Scroll through with the up/down arrows to select “Maint Tank”
* Select with the right arrow and execute with the right arrow
* Turn your printer off then turn it back on.
Read More..

Stylus Photo RX650

Here this step to use Resetter Printer Epson RX650
  1. Switch on printer
  2. Set the pc date setting to 13 february 2007
  3. Run adjprog.exe from the extracted folder
  4. Click accept
  5. Click particular adjustment mode
  6. Go to maintenance then Select waste ink pad counter then click ok
  7. Click on "check button till its done then click on initialization button then click on finish button
  8. Switch off printer for 5 secs then switch on again
  9. After you reset succesfully, you can change the date back to normal
Download Resetter Epson RX650
Read More..

Stylus Photo R390

  1. Turn on the printer
  2. Set the pc date setting to 1 January 2007
  3. Adjprog.exe run from the extract of a folder (or locate the file or application. Exe and run it)
  4. Click accept
  5. Click on the particular mode adjustment
  6. Go to interview Then select waste ink pad counter then click ok
  7. Click "button box" until it is done then click "initialization" button and then click "finish button"
  8. Turn off the printer for 5secs then turn again
  9. Set the date today.
Download Epson R390
Read More..

resetter printer epson cx3900

Here this step to use resetter printer epson cx3900

  1. Switch on printer
  2. Set the computer date setting date to 23 january 2007
  3. Run adjprog.exe from the extracted folder
  4. Click accept
  5. Click particular adjustment mode
  6. Go to maintenance then Select waste ink pad counter then click ok
  7. Click on "check button" till its done then click on "initialization button" then click on "finish button"
  8. Switch off printer for 5secs then switch on again
  9. After you reset succesfully, you can change the date back to normal
Download Epson cx3900
Read More..

SSC Service Utility versions 4.30

- support for R270
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes
Read More..

SSC Service Utility versions 4.20

- support for CX4200/CX4700/CX4800/DX4200/DX4800
- support for C47/C48
- support for RX430
- support for CX6500/CX6300
- improved support for CX6400/CX6600
- improved support for RX500/RX510
- improved support for RX600/RX610
- improved support for R1800
- improved support for CX3700/CX3800/DX3800/DX3850
- improved support for C67/C68/D68
- improved support for C87/C88/D88
- many new chip models supported
- some other improvements and bug fixes download SSC Service Utility versions 4.20 here
Read More..

SSC Service Utility versions 4.10

SSC Service Utility versions 4.10
- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes
here
Read More..

SSC Service Utility versions 4.00

- ability to work with additional reset device
- support for CX4600
- support for CX5300
- support for CX5100
- support for RX420
- support for RX425
- support for RX620
- support for R1800
- improved support for almost all other printers
- improved ink freezer
- improved ink monitor, implemented status information
- protection counter reset improvements
- various bug fixes

Supported printer list:

  • Epson Stylus Color 400
  • Epson Stylus Color 440,
  • Epson Stylus Color 480 LPT,
  • Epson Stylus Color 480SXU / 580,
  • Epson Stylus Color 600,
  • Epson Stylus Color 640
  • Epson Stylus Color 660
  • Epson Stylus Color 670
  • Epson Stylus Color 680 / 777
  • Epson Stylus Color 740
  • Epson Stylus Color 760
  • Epson Stylus Color 800 / 850
  • Epson Stylus Color 860
  • Epson Stylus Color 880
  • Epson Stylus Color 900 / EM-900C
  • Epson Stylus Color 980
  • Epson Stylus Color 1160
  • Epson Stylus Color 1520
  • Epson Stylus Color 3000
  • Epson Stylus C20 / C40 / CL-750
  • Epson Stylus C41 / C42 / C43 / C44 / C45 / C46 / C47 / C48
  • Epson Stylus C50
  • Epson Stylus C60
  • Epson Stylus C61 / C62
  • Epson Stylus C63 / C64
  • Epson Stylus C65 / C66 and PE
  • Epson Stylus C67 / C68 / D68 and PE
  • Epson Stylus C70
  • Epson Stylus C80
  • Epson Stylus C82
  • Epson Stylus C83 / C84
  • Epson Stylus C85 / C86 and PE
  • Epson Stylus C87 / C88 / D88 and PE
  • Epson Stylus Photo RX420 / RX425 / RX430
  • Epson Stylus Photo RX500 / RX510
  • Epson Stylus Photo RX520
  • Epson Stylus Photo RX600 / RX610
  • Epson Stylus Photo RX620
  • Epson Stylus Photo RX700
  • Epson Stylus CX3100 / CX3200
  • Epson Stylus CX3500 / CX3600 / CX3650
  • Epson Stylus CX3700
  • Epson Stylus CX3800 / CX3810 / DX3800
  • Epson Stylus CX4500
  • Epson Stylus CX4600
  • Epson Stylus CX4100 / CX4200
  • Epson Stylus CX4700 / CX4800
  • Epson Stylus DX4200 / DX4800
  • Epson Stylus CX5100 / CX5200
  • Epson Stylus CX5300 / CX5400
  • Epson Stylus CX6400 / CX6600
  • Epson Stylus CX6300 / CX6500
  • Epson Stylus CX7800
  • Epson PictureMate
  • Epson Stylus Photo
  • Epson Stylus Photo EX
  • Epson Stylus Photo 700 / IP-100
  • Epson Stylus Photo 750 / PM-770C
  • Epson Stylus Photo 780 / 790 / PM-780C
  • Epson Stylus Photo 810 / 820
  • Epson Stylus Photo 820
  • Epson Stylus Photo 825 / 915
  • Epson Stylus Photo 830 / 830U
  • Epson Stylus Photo 870 / PM-875DC
  • Epson Stylus Photo R200 / R210
  • Epson Stylus Photo R220 / R230
  • Epson Stylus Photo R300 / R310
  • Epson Stylus Photo R320
  • Epson Stylus Photo R800 / PX-G900
  • Epson Stylus Photo R1800
  • Epson Stylus Photo R2400
  • Epson Stylus Photo 890
  • Epson Stylus Photo PM-890C
  • Epson Stylus Photo PM-A700
  • Epson Stylus Photo PM-G720
  • Epson Stylus Photo PM-970C
  • Epson Stylus Photo 895/ 785EPX
  • Epson Stylus Photo 900
  • Epson Stylus Photo 925 / 935
  • Epson Stylus Photo 950 / 960 / PM-950C
  • Epson Stylus Photo 1200 / PM-3000C
  • Epson Stylus Photo 1270 / PM-3300C
  • Epson Stylus Photo 1280 / PM-3500C
  • Epson Stylus Photo 1290
  • Epson Stylus Photo 2000P
  • Epson Stylus Photo 2100
  • Epson Stylus Photo 2200 / PM-4000EPX
  • Epson Stylus Pro 5000 / PM-5000C
Read More..

Epson Printers Resetter

The No Cost Solution to resetting your Epson Chips on a variety of Epson Stylus Color and Stylus Color Photo Printers. Yes, there is software out there that will allow you to reset your Epson Chip printers.

Before we go and give you the link we first want you to understand a few things:

  1. This software is a very poweful piece of software and should not be used without first reading the accompanied instructions. Read all documentation before using.
  2. We have no stake in this software and there is no finacial benefit for our recommending it. We do recommend it because it is out there and works . We are in the ink business, not the chip reset business. Any way we can make it easier for you to refill benefits us greatly
  3. Due to some recent architecure changes in chip design some printers can not have their chip reset with the software, but the software will allow you to store the values of a full status. If this alternative does not fufill your needs we do have available chip resetters by in our store as well as auto-reset chips.

Below the link to SSC service utility home pageis a list of updates and supported printers. The level of supported printers varies dependingon the type of chip used on the cartridge & printer firmware.


Read More..

Epson 2200 Manual Reset

  1. Turn off the printer power and unplug the power cord from the wall. Disconnect the computer interface cable at the back of the printer.
  2. After one minute reattach the power plug to the wall, but don’t reattach the computer cable.
  3. Hold down the ROLL and the PAPER ADVANCE buttons simultaneously.
  4. Turn the printer on. after 2 blinks, all the ink lights come on, then release the buttons being held down.
  5. Press and hold the ROLL button for 10 seconds.
  6. Release the ROLL button and the printer will initialize, which resets the Waste Ink Pad Counter.
  7. Once initialization is complete, turn the printer power off.
  8. Reconnect the interface cable.
  9. Turn the printer on and print a document.
Read More..

Epson Stylus Pro 4000 Waste Ink Counter Reset

  • While Powering up the printer, hold down the the left arrow, down arrow, and Up arrow buttons
  • You will get a “Self Testing” message.
  • Use the Up Arrow button to select the “Clear Counters” menu.
  • Press the right arrow button (the Menu button).
  • Scroll through with the up/down arrows to select “Maint Tank”
  • Select with the right arrow and execute with the right arrow
  • Turn your printer off then turn it back on.
Read More..

The Secret Resetter Code for Canon S450 Printer



1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. Release Power button
6. When the indicator lights steady, press RESUME 3 times. The indicator should be orange.
7. Press Power to set data

The Secret Resetter Code for Canon BJC-2000 BJC-2100 Serie

1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET.
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Unplug AC Power Cord to set data.
Read More..

he Secret Resetter Code for Canon BJC 1000 Serie



1. Remove Cartridge
2. Unplug the AC Power Cord
3. Hold down the RESUME button
4. Release RESUME after plugging in the AC Power cord.
5. Press the RESUME once within 5 seconds and release the RESUME .
6. Press and HOLD RESUME for two seconds or more and release it.
7. Press and HOLD RESUME for two seconds or more and release it.
8. Unplug AC Power Cord to set data.
Read More..

The Secret Resetter Code for Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265 Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650



1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons
5. Open front door of printer
6. Hold the CARTRIDGE and RESUME buttons
7. Press POWER
8. Release all buttons after the beeps
9. Press CARTRIDGE once
10. Press RESUME

The Secret Resetter Code for Canon BJC-5000

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
5. Press Power to set data

Service Test Print

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 2 times. The indicator should be GREEN.
5. Press Power to Print

Nozzle Print

1. Power off printer
2. Press and POWER, until the printer beeps and release.

Demonstration Print

* While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

The Secret Resetter Code for Canon BJC-5100
Self Test

* Switch Printer off. Hold Power for 1 beep.

Waste Counter Reset

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 4 times. The indicator should be GREEN.
5. Press Power to set data

Service Test Print

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 2 times. The indicator should be GREEN.
5. Press Power to Print

Nozzle Print

1. Power off printer
2. Press and POWER, until the printer beeps and release.

Demonstration Print

* While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
Read More..

The Secret Resetter Code for Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA IP3000 above



1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
Read More..